Wednesday 14 December 2016

Unicorn and T-Rex Roller Derby Trophies


Hello! As it's coming up to the end of the year, my roller derby league recently had the annual aWARDs ceremony (our league is named WARD, geddit? ~___^), where we recognise excellent contributions to the league! Obviously, we needed trophies, but we had a fairly limited budget. DIY to the rescue!
 

I was originally thinking wood for the bases of the trophies but then I started thinking about cutting thirty pieces of wood ... and sanding them ... and I decided that I didn't want to do that! Plus, not only did I have a limited budget, I also had a very limited time span to actually construct the trophies between work and other commitments (i.e. one day).
 

So I wandered around the hardware store under I stumbled upon the plumbing section and found these push on caps! They are solid white plastic, and pretty cheap! They did come with some raised writing on them, but a quick sand with my Dremel got rid of that! I will note here that if you're going to sand plastic, be sure you wear appropriate safety gear because there was plastic dust EVERYWHERE. A dust mask + goggles are a must, and if you've got one of those CSI style plastic coveralls then that probably wouldn't go astray either! ~___^
 

After sanding (and wiping away all the dust!) I super-glued my animals to the bases. I got my animals at the Reject Shop but unfortunately they didn't have enough horses for the unicorns. So some zebras and donkeys also got re-purposed!
 

I made horns using some Sculpey - I only used a tiny bit from my stash so if you were buying new, one little pack would be more than enough.
 

After baking for about ten minutes on a low heat and letting them cool, I super-glued them onto the relevant animals.
 

And also one dinosaur! Dinocorn? T-rexicorn? Unisaurus?
 
 

A couple of coats of gold spray paint made them look all shiny and special and then all I had to do was stick on the names of the trophies (I printed them onto white card and attached them to the trophies with double-sided tape) and give a quick coat of sealant. 
 

Here they all are, ready to be awarded!
 

Although I made the trophies, I didn't have anything to do with collating the votes to determine the aWARD winners so I was very pleasantly surprised when I was awarded Most Improved NSO! So one of the golden T-Rex trophies came back home with me; we're buddies now.

- Lisa xx

1 comment:

Anonymous said...

I love your idea! I’m making dinosaur trophies thanks to your inspiration. Thanks for sharing!!